> Sales > LM400 Megamat ll
 |
 |
 |
|
LM400 MEGAMAT Ⅱ is the most ideal machine when manufac-tured PCBs, and it is capable of utmost testing 900 PCBs perhour. Also it is convenient for easily use due to having widely visible sight structure, As the table table height of megamat ll is the same as picomat designed for maximizing work efficient, It can test a variety of PCBs because it is fundamentally installed with retractable guide rail system. It can minimize the damage of testing PCBs because grafts state-of-the-art facilities(vacuum feeding, restacking production method) onto the existing system. It is newly machine that designed for facile repair of table movement X-axle unit. Grid density in the lm400 megamat ll is consist of 50mil, 70mil and 100mil. the machine is totally able to test entire PCBs of dense composition especially in the density of 50 mil which is produced in Korea. |
| Maximum | 488 x 406mm / 19.2” x 16” |
|---|---|
| Minimum board size | 50 x 50mm / 1.97” x 1.97” |
| Maximum board size | 540 x 460mm / 21.26” x 18.1” |
| Minimum board thickness | 0.6mm / 0.0023” |
| Maximum board thickness | 8mm / 0.315” |
| In 50mil | Onside:122880 / bothside:245760 |
|---|---|
| In 70mil | Onside:61440 / bothside:122880 |
| In 100mil | Onside:30720 / bothside:61440 |
| Test Voltage | 40 - 250VDC |
|---|---|
| Continuity Threshold | 10 - 10KΩ |
| Isolation Threshold | 100K - 100MΩ |
|
Embedded
Resistor Measurement (Resistance value is set in the ADAM-II.) |
Range 1 - 10KΩ Accuracy < 100Ω : < 2Ω, 100 ? 10KΩ : < 2% |
| Optionally | < 100Ω : < 0.5Ω |
| Hour work quantity | Up to 1200 sheets |
| (ADAM-II can only work.) |
Generated file : Drill-file, UDL file( test file), OBJ file ( verify file )
Workable Data format : IPC_D_356A .dpf - data ODB++ Mask & Drill data |
|---|
|
Failure positioning and coordinate analysis (verify) the "CAR-II" or "LM400/50.2 Picoprobe with Verfication" in Workable
|
|---|
