> Sales > LM800 Picomat ll
 |
 |
 |
|
LM800 Picomat ll is the most ideal machine when manufac-tured PCBs. Also it is convenient for easily use due to having widely visible sight structure. It can test a variety of PCBs because it is fundamenfally installed with retractable guide rail system. It can minimize the damage of testing PCBs because grafts state-of-the-art facilities(vacuum feeding, restacking production method) onto the existing system. It is newly machine that designed for facile repair of table movement X-axle unit. Grid density in the lm800 picomat ll is consist of 35 mil.
The machine is totally able to test entire PCBs of dense composition especially in the density of 35mil which is produced in Korea. |
| Maximum | 325 x 244mm / 12.8"x9.6" |
|---|---|
| Minimum board size | 50 x 50mm / 1.97" x 1.97" |
| Maximum board size | 365 x 284mm / 14.4" x 11.2" |
| Minimum board thickness | 0.6mm / 0.0023" |
| Maximum board thickness | 8mm / 0.315" |
| In 35mil | Onside:98304 / bothside:196608 |
|---|---|
| In 50mil | Onside:49152 / bothside:98304 |
| In 70mil | Onside:24576 / bothside:49152 |
| In 100mil | Onside:12288 / bothside:24576 |
| Test Voltage | 40 - 250VDC |
|---|---|
| Continuity Threshold | 10 - 10KΩ |
| Isolation Threshold | 100K - 100MΩ |
|
Embedded
Resistor Measurement (Resistance value is set in the ADAM-II.) |
Range 1 - 10KΩ Accuracy < 100Ω : < 2Ω, 100 ? 10KΩ : < 2% |
| Optionally | < 100Ω : < 0.5Ω |
| Hour work quantity | Up to 1200 sheets |
| (ADAM-II can only work.) |
Generated file : Drill-file, UDL file( test file), OBJ file ( verify file )
Workable Data format : IPC_D_356A .dpf - data ODB++ Mask & Drill data |
|---|
| Failure positioning and coordinate analysis (verify) the "CAR-II" is through. |
|---|
